Made from heavy duty 7 mm aluminum plate with 6mm fixing brackets, which are zinc coated for extra corrosion resistance. The aluminum plate has 9 vent holes (38mm dia.) to allow for ventilation, and to allow excess water to drain.
BA083 - Standard skid Plate
BA083C - Skid plate for winch bumper

These heavy duty sill protectors replace the rocker panels and bolt directly to the chassis. The D90 sliders incorporate an integrated jacking point, as shown.
Available galvanized for long-lasting corrosion resistance, or in  a black nylon coating.

BA 109 - Defender 90, nylon - $225.00
BA109G - Defender 90, galvanized - $249.95
BA 110 - Defender 110, nylon - $235.00
BA 110G - Defender 110, galvanized - $299.95

Protects the differential housing from damage. Easily installed, no drilling required. Zinc plated for corrosion resistance. Two-bolt retention for a tight fit. Suitable for front or rear fitment.

Protects the differential housing from damage. Easily installed, no drilling required. Zinc plated for corrosion resistance. Two-bolt retention for a tight fit. Suitable for front or rear fitment. Made from corrosion-free stainless steel.

This rugged bolt-on diff guard protects the tender part of the pumpkin, where it's most prone to damage. Thick and sturdy, the wrap-up-n-around design ensures this guard will stay put. Easy access to drain and fill plugs, the bottom drain prevents mud fill-up. Zinc plated for corrosion resistance. No welding, drilling or suspension disassembly required.

Made from sturdy 2mm aluminum 5 bar plate, not only do these enhance the appearance of your vehicle but also allow you to step on top of your fender to gain access to the roof rack. Sold in pairs, supplied with rivets.

BA 113 - With vent hole, for Defender - $74.95
BA 113A - Without hole, for Series  - $74.95
BA 108 - Forward portion of wing only - $49.95

Made from sturdy 3mm aluminum 5-bar plate, not only does it enhance the appearance of your vehicle but also allow you to step on top of your hood to gain access to the roof rack. (Fender-top protectors sold separately)

Made from 5 bar aluminum plate, these protect the lower part of the rear quarter from stone and gravel damage. The ideal finishing touch, the same protector used on the Land Rover Limited Edition models. (May require relocation of side marker)

BA124 - for Defender 90 - $42.95
BA124/A - for Series Land Rover 88 - $42.95

Made from 5 bar aluminum plate, these protect the sill from scuffing while entering or leaving the vehicle, as well as from stone chips and light off-road damage. The ideal finishing touch. the same protector used on the Land Rover Limited
Edition models.

BA 126 - fits Defender 90 - $45.00
BA 126/A - fits Series Land Rover 88 - $45.00
BA 127 - fits Defender 110 - $75.00
BA 127/A - fits Series Land Rover 109 - $75.00

Constructed of steel folded section with sturdy brackets, coated in black nylon. Bolts directly in place of the existing grab handles and provides excellent protection. Sold in pairs.

Heavy duty 1" tube construction complete with brackets. Black nylon coated. Bolts directly in place of the existing grab handles and provides excellent protection. Sold in pairs.

Heavy duty 1" tube construction complete with brackets. Galvanized coating. Bolts directly in place of the existing grab handles and provides excellent protection. Sold in pairs.

These heavy duty bumperettes are not only stylish, but offer good protection to the rear and lower quarters of your vehicle. Black powder coated with 5-bar treads. These are very practical and give your Rover a very individual look. Sold in pairs.

Designed to bolt to the civilian style crossmember. Made from heavy gauge steel and powder coated for durability. (requires drilling of crossmember) Sold in pairs.

The HD’s are here!
In an exclusive agreement with ProComp, we are proud to release the new ES9000HD!
Heavier built to take the punishment of the heavy Land Rovers and featuring a lifetime warranty. These extended length ProComp ES9000HD's are designed and custom-built just for us, another D.A.P. exclusive. 2" longer than stock for your lifted Rover. The Pro Comp ES 9000HD is the ultimate nitrogen gas charged shock absorber. With its twin tube design and 10 stage velocity sensitive valving, the ES 9000HD delivers not only a smooth, comfortable highway ride, but is also enhances off-road handling and performance. Engineered for those driving enthusiasts demanding optimum capacity for heavy loads, as well as the most demanding driving conditions. It's 1 3/8" nylon banded full displacement piston head and double welded shock mounts ensure maximum strength and long lasting durability. Minimum 2" lift springs required for fitment. Bellows boot included. Sold in sets of 4.

Why put Autobahn shocks on your off-road rig?! Manufactured in Europe specifically for 4x4’s, these gas shocks keep your tires planted on the trail and absorb the bumps on the road. Improved handling and ride quality over the stock oil-filled shock, but at a fraction of the price of the “other” yellow shock. Please specify model when ordering.

Click Here for more information.

These new softer compound poly bushings deliver all the benefits of traditional “hard-poly” while giving a comfortable ride. Constructed with unique urethane elastomers with the versatility and elasticity of rubber yet with the advantages of rigid plastics and metals. These long-wearing bushings have been rigorously tested at extremes and performed flawlessly. Please specify model when ordering.

These heavy duty tubular front shock mounts are constructed from heavy wall tubing and galvanized for a long life. Sold in pairs.

The front unit consists of top bracket, to take the original shock absorber plus an additional one, and a bolt-on bottom bracket to support the additional shock absorber. Trimming of the inner fender is required. The rear unit consists of top shock absorber brackets which bolt through the chassis and bottom brackets which weld onto the axle case.
BA 2157- Front, D90 / Discovery I / RR Classic - $189.95
BA 2158- Rear, Defender - $139.95
BA 2159- Rear, Discovery - $139.95
BA 2162- Rear, Range Rover Classic - $139.95

Custom made Bottom Link to Chassis (BLTC) bushings. These bushings apply more pressure between the end washers to stop the common tail end steering problem that has plagued Land Rovers since the release of the Range Rover. Made from rubber with concave rubber mounting surfaces hold the rear axle securely in position. No modifications required. Sold in pairs.

A simple item to relieve the pressure on the top rear shock mount bushings to give greater flexibility, wheel travel and longer shock bush life. This product is a 16 mm wedge changing the angle of the top shock mount to a more desirable position. The kicker kit comes complete with 2 wedging plates, all bolts required and some fancy custom made wedge washers to maximize a secure fit.

This heavy duty unit can be adjusted to take up the slack as wear occurs.

These are the ultimate brake pads for your Rover. High performance carbon-fiber composite construction. Eliminates squeal, reduces disc wear, and offers a 30% improvement in braking performance. Sold as axle sets with backing pads and sensor wires. Can be used with standard brake rotors, but maximum braking efficiency is achieved with our drilled and slotted rotors listed above. Save even more by purchasing our Heavy-Duty Brake Kits - click here to see the kits.

Click Here for applications.

Our braided stainless steel brake hose sets replace the standard flex hoses and are a much more durable alternative. Less prone to failure on the street or on the trail, they are plastic coated for corrosion protection and offer much improved brake performance. These D.O.T. and TUV approved lines are manufactured by the very company which supplies the world’s top racing teams. Be aware of cheap imitations, these are the real deal. Please specify model when ordering.

Click Here for applications.

Made of a heavy steel alloy, these steering rods resist bending and are rally proven. 
Sold in pairs complete with heavy-duty greaseable ball joints.

Click Here for applications.

Improve your turning radius and handling by widening the track of your Rover with these 1.25" spacers. Precision made from billet aluminium with heat-treated studs, designed for off-road performance, superior strength and of hub-centric design for smooth operation. Set of 4 spacers with lug nuts included. TUV Approved, tested for safety, which lower-priced imitators cannot claim!

Each set is supplied with an individually coded installer "key", and 4 or 5 locks in chrome or black finish (by application). Fits factory alloy wheels only. Steel wheel sets available as a special order.

Click Here for applications.

16" x 5.5" Steel Wheel for Land Rover, as fitted to Defender models. Perfect extra set for winter tires and full size spares.

16" x 7" Steel Wheel for Land Rover. Modular look finished in silver. Sold in sets of 4.

ORDER HOTLINE 800-955-2818 (for orders only)
All other inquiries call  802-885-6660
Monday - Friday, 8AM - 6PM Eastern Time (USA)

Prices, availability, specifications, and applications subject to change without notice.
Manufacturer part numbers used for reference only. Shipping not included in price.
"Land Rover", "Range Rover", "Discovery", "Defender", "Freelander"
are registered trademarks of Land Rover North America.
Web site and photos Copyright © 1998-2008 D.A.P. Enterprises LLC